|
Heatmiser PRT-E
The PRT-E is our electric underfloor heating thermostat
offering 2 modes of operation, selectable in software by the
installer. In either mode, the thermostat offers a 5/2 day
program, allowing you to program 4 temperature levels for
the weekday and 4 different at the weekend.
Mode 1: In this mode, the thermostat will maintain the
floor temperature according to the temperature level set.
This mode is ideal for bathrooms and kitchens.
Mode 2: In this mode, the thermostat will maintain the
air temperature according to the temperature level set, but
will also monitor the floor temperature from the remote
sensor. Using the floor sensor and the adjustable floor
limit setting, the thermostat restricts the floor from
overheating.
- 13A switching
- Optimum Start
- Floor & Air/Floor Modes
- 5/2 Program
- 4 Comfort Level Settings
- Keylock Facility
- Adjustable frost setting
-
05-35°C
from built in sensor
-
05-70°C
from remote sensor
- 3 meter remote Sensor Supplied
You should ensure the floor probe is installed into a
conduit so that it can be retrieved if required.
|
Click here to view the downloads
available for these products.
See the Heatmiser PRT-E in our Shop
|
