|
|
> PCLink Compatible
Control your heating from your PC with
PCLink
> TouchPad Compatible
The TouchPad is our master touchscreen
offering the user the facility of operating up to 32 thermostats from one central
point.
> TR1 Compatible
Have complete control over your heating
system even whilst you are away! With the TR1 you can remotely control the
low voltage thermostats in your home.
> UH1 Compatible
The UH1 is our central wiring switch box
for the low voltage thermostats, providing outputs of the boiler, pump and
zone valves
> Keypad Lock
Locking facility to prevent tampering of
the programmed settings.
|
|
|
Our 12v Network range of
thermostats have been designed to work as part of a network
system, and can be used in conjunction with the Network Products
and PC Link (Windows based) PC connection program.
Tip ! Using our
Heatmiser UH1 central wiring box
makes incorporating these thermostat into your home heating
system much easier. Simply run a CAT5 FTP cable to each
thermostat from the UH1 and the UH1 will deal with 1) power to
the stat 2)communications to the
TouchPad etc 3) Switching to the valve /Actuator and Boiler
and Pump. Click here
to view the UH1 wiring diagram for more information.
Click here to go this category in our online shop.
|
Heatmiser DT-N
The DT-N is our low
voltage digital
room thermostat, ideal for conventional or combi-boiler
systems. This thermostat does not feature an internal
clock and so is normally used with a separate
time-clock.
-
3A volt free switching (Standard)
-
KeyLock Facility
-
Adjustable Frost Temp
Setback
-
°C °F Selectable
-
TouchPad, Netmonitor,
PCLink Compatible
-
05-35°C
room temperature
See the Heatmiser DT-N in our Shop
Heatmiser PRT-N
The PRT-N is our low
voltage 5/2 day programmable room thermostat. The PRT-N is
a digital thermostat and programmer in-one. Providing up
to 4 different temperatures at different times of the day.
-
3A volt free switching (Standard)
-
05-35°C
room temperature
-
Optimum Start
-
5/2 Day Programming
-
KeyLock Facility
-
Adjustable Frost Temp
Setback
-
°C °F Selectable
-
TouchPad, Netmonitor,
PCLink Compatible
-
Time Sync (When used with
TouchPad / PCLink)
See the Heatmiser PRT-N in our Shop
Heatmiser PRT-EN
The PRT-EN is our low
voltage 5/2 day programmable room thermostat with
remote air and floor sensor facility. The PRT-EN is
perfect for controlling floor heating systems as a 3 meter
remote floor sensor is included.
Alternatively, this model can be used to measure ambient
temperature in bathrooms. We would suggest installing
the thermostat in an adjacent room and use the remote
probe supplied to either measure floor or air
temperature (selectable in software) If you wish to
measure air temperature, the probe can be installed in
our
sensor housing.
-
3A volt free switching (Standard)
-
3 Meter Remote Probe Supplied
-
05-35°C
room temperature
-
Optimum Start
-
5/2 Day Programming
-
KeyLock Facility
-
Adjustable Frost Temp
Setback
-
°C °F Selectable
-
TouchPad, Netmonitor,
PCLink Compatible
-
Time Sync (When used with
TouchPad / PCLink)
See the Heatmiser PRT-EN in our Shop
Heatmiser PRT/HW-N
The PRT/HW-N is our low
voltage 5/2 day programmable thermostat with an additonal
5/2 day program for a domestic hot water cylinder. Reduced
costs and wiring means the PRT/HW-N really is an
all-in-one solution.
-
3A volt free switching (Standard)
-
05-35°C
room temperature
-
TouchPad,
Netmonitor, PCLink Compatible
-
KeyLock
Facility
-
Adjustable Frost Temp
Setback
-
5/2 Day
Programming for Heating
-
5/2 Day
Programming for Hot water
-
°C °F Selectable
-
Optimum Start (Energy
saving feature)
-
Time Sync
(When used with TouchPad / PCLink)
See the Heatmiser PRT/HW-N in our Shop
|
|
