|
|
> 7
Day Programming
Program 3 switching times for each day of
the week.
> Self Learning Optimisation
A system where the control automatically
calculates the turn on time to ensure the building is up to temperature
for the programmed time.
> Override Facility
Quickly and easily override the
programmed switching time without the need to re-program the entire
system.
> Built In Sensor
These models include built in sensor,
therefore removing the need to wire to a remote sensor.
> Security Coding
Prevent unauthorised tampering of the
Heatmiser program settings.
>
Frost Protection
Built in frost protection facility to
protect the fabric of the building.
Multiple Fan Operation
Three modes of fan operation can be
selected. Summer fan, where the fan output is activated above the set
temperature. Constant fan, where the fan is activated constantly
throughout the programmed time. Manual, where the user can operate the fan
manually using the fan button.
|
|
|
Our Economy 2000 series feature built in sensors and therefore
offer the most cost effective method of controlling a single
zone of radiant or warm air heating - ideal when the control
will be installed within the heated area.
|
 |
|
|
Heatmiser Economy 2000
The
Heatmiser Economy 2000 is our low cost self learning
optimiser designed for warm air and radiant heating
applications. It is the ideal choice when simple on / off
control of the heater is required.
|
Heatmiser Economy 2000L
The
Heatmiser Economy 2000L is identical to the 2000 but also
includes heater lockout and reset facility for use on
heaters with electronic ignition. A 240v signal can be
wired in to the Economy 2000L. On receipt of a fault
indication, a warning message is displayed on-screen. On
rectification of the fault, the Economy 2000L can send a
signal which clears the lockout status.
|
|
