Digital Thermostat | Programmable Thermostat

Home Page  |  Sitemap  | Contact UsLinks

     German   

 
 
 
   
The Touchscreen series of thermostats have been designed to make life a little easier. The intuitive touchscreen display makes searching for the user manual a thing of the past.

Tip ! If you are replacing an existing mechanical thermostat, you should check that you have the correct number of wires at the thermostat before ordering. All these thermostats are mains powered, and so therefore need a permanent 230v supply. So, a minimum of 3 wires is needed for these thermostats to operate.


This series of thermostat is designed to be flush mounted. The overall size is after installation is 110x100x17mm


Heatmiser PRT-ETS
The PRT-ETS is our programmable digital room thermostat designed specifically for electric floor heating. This high power model offers 5 temperature modes.
  • Blue backlit Touchscreen
  • 13 Rating
  • 5/2 Day or 7 Day Program Mode
  • 05-35°C Range
  • 3 Meter Remote Probe Included
  • Keylock Facility
  • Temperature Hold Facility
  • Holiday Feature
  • 5 Sensing Modes - Perfect for Electric Floor Heating
Mode 1: Built in Air Sensor
Mode 2: Remote Air Sensor
Mode 3: Floor Sensor Only
Mode 4: Floor & Built in Air Sensor
Mode 5: Floor & Remote Air Sensor
 
Due for launch in October 2008
User Manual Download



Heatmiser PRT/HW-TS
The PRT/HW-TS is our two channel programmable room thermostat and hot water timeclock.
  • Blue backlit Touchscreen
  • 3A Rating
  • 05-35°C Range
  • Heating: 5/2 Day or 7 Day Programming (User Selectable)
  • Hot Water: 5/2 Day or 7 Day Programming (User Selectable)
  • Keylock Facility
  • Temperature Hold Facility
  • Holiday Facility
 
Due for launch in October 2008

User Manual Download
















Heatmiser DT-TS - Non Programmable Thermostat
The DT-TS is our non programmable digital room thermostat, ideal for conventional or combi boiler systems with an existing timeclock.
  • Blue backlit Touchscreen
  • 3A Rating
  • 05-35°C Range
  • Keylock Facility
Due for launch in October 2008
User Manual Download
 

 
Heatmiser DT-ETS - Non Programmable Thermostat for Electric Floor Heating 
The DT-ETS is our non programmable digital room thermostat designed specifically for electric floor heating. This high power model offers 5 temperature sensing modes.
  • Blue backlit Touchscreen
  • 13 Rating
  • 05-35°C Range
  • 3 Meter Remote Probe Included
  • Keylock Facility
  • 5 Sensing Modes - Perfect for Electric Floor Heating
Mode 1: Built in Air Sensor
Mode 2: Remote Air Sensor
Mode 3: Floor Sensor Only
Mode 4: Floor & Built in Air Sensor
Mode 5: Floor & Remote Air Sensor
 
Due for launch in October 2008
User Manual Download
 

 
Heatmiser PRT-TS - Programmable Thermostat
The PRT-TS is our programmable digital room thermostat, ideal for conventional or combi boiler systems.
  • Blue backlit Touchscreen
  • 3A Rating
  • 05-35°C Range
  • 5/2 Day or 7 Day Programming (User Selectable)
  • Keylock Facility
  • Temperature Hold Facility
  • Holiday Facility
Due for launch in October 2008
User Manual Download
 

 



   


   

 

 

 

 

 

 

 

 

 



   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
Heatmiser UK, Primrose House, Primrose Street, Darwen, Lancashire. BB3 2DE
Telephone: +44 (0)1254 776343  Fax +44(0)1254 704143
Infinite Menus, Copyright 2006, OpenCube Inc. All Rights Reserved.